Welcome,
Metallurgy is one of the important fields of science that is very useful in human life and has been studied since pre-history. For this reason, in the Department of Materials and Metallurgical Engineering, this field of science is studied in-depth, from mineral extraction, manufacturing, treatment processes to degradation of these materials.
The Metallurgy and Manufacturing Laboratory is one of the institutions in the Department of Materials and Metallurgical Engineering which is formed for supporters in research and learning in the field of metallurgy and manufacture process. This lab is one of the oldest labs that was established together with the establishment of the Department of Materials and Metallurgical Engineering. In this laboratory studied metallurgy related to the mechanical properties, physical properties and chemical properties of the material and also the heat treatment process to engineer the properties of the material. Furthermore, this lab also studied the manufacturing process, including, welding technology, casting technology, and heat treatment
For this reason, some practicums in this Lab include Metallurgical Practicum I, Metallurgical II, welding, casting, etc. The microstructure of the metal and its changes after-treatment of the material were studied in the field of metallography which observed the structure of the metal.
Finally, with the mastery of knowledge in the field of metallurgy, the technological independence of the Indonesian people who are rich in natural resources will soon be realized.
Physical metallurgy is a field of study in metallurgy where the focus are on the physical properties and microstructure transformation of metal and alloys. To achieved good properties in metal and its alloys, the effect of chemical composition, manufacturing method such as casting, jointing, machining, plastic deformation, surface engineering and heat treatment on microstructures transformation has to be developed by research, instruction and industrial service.
Failure analysis on fracture component in cement industry and sugar mill factory
Gravity permanent casting of non ferrous and its alloys
Heat treatment of non ferrous and its alloys
Steel heat treatment
Stainless steel welding
Name : Wikan Jatimurti, S.T., M.Sc
NIP : 198303252014041001
Position : Penata / IIIc
Academic Position : Assistant Professor
Email : jatimurti@its.ac.id
Name : Prof. Dr. Agung Purniawan, ST. M.Eng
NIP : 197605282002121003
Position : Pembina TK. I / IVb
Academic Position : Profesor
Email : a.purniawan@its.ac.id
Name : Sutarsis, ST., M.Sc
NIP : 197708172005011001
Position : Penata / IIId
Academic Position : Assistant Professor
Email : sutarsis@its.ac.id
Name : Dian Mughni Fellicia, S.T., M.Sc
NIP : 198405152014042003
Position : Penata Muda Tk.I/ IIIb
Academic Position : Assistant Professor
Email : dian@mat-eng.its.ac.id
Nama : Alvian Toto Wibisono, S.T, M.T
NIP : 199106092015041001
Pangkat/Gol : Penata Muda Tk.I / IIIb
Jabatan Fungsional : Asisten Ahli
Email : alvian@its.ac.id
Name : Moh. Abdul Chanan. S.T.
NIP : 197005052000031001
Position : Penata Muda Tk.I / IIIb
Academic Position : Technician Laboratory
Email : chanan@mat-eng.its.ac.id
Name : Asman
NIP : -
Position :
Academic Position : Technician Laboratory
Email : -
Journals
2020, ANALYSIS OF FORMALDEHYDE COMPOSITION EFFECT ON THE MORPHOLOGY OF POLY (UREA-FORMALDEHYDE) MICROCAPSULE CONTAINING LINSEED OIL, B Prasetya, A Purniawan, H Ardhyananta, MATERIALS RESEARCH COMMUNICATIONS 1 (2), 12-18
2020, OPTIMIZING FRANGIBILITY FACTOR OF CU-SN COMPOSITE MATERIAL BY TAGUCHI AND NEURAL NETWORK METHODS, W Widyastuti, MK Damayanti, MI Hidayat, H Ardhyananta, MATERIALS RESEARCH COMMUNICATIONS 1 (1)
2020, Effect of Sintering Temperature on Morphology, Mechanical Properties and Degradation Rate of Magnesium Alloy as Biodegradable Material, A Purniawan, PA Timotius, H Purwaningsih, ST Wicaksono, A Rasyida, Journal of Computational and Theoretical Nanoscience 17 (2-3), 1534-1538
2020, High sound absorption of polymer composites/fiber hemp/nanocellulose for automotive interior materials M Farid, A Purniawan, S Diah, VM Pratiwi, MI Yoessa, Materials International 2 (2), 0170-0174
2020, Manipulation of Nitrogen-Heteroatom Configuration for Enhanced Charge-Storage Performance and Reliability of Nanoporous Carbon Electrodes, Sutarsis, J Patra, CY Su, J Li, D Bresser, S Passerini, JK Chang, ACS applied materials & interfaces 12 (29), 32797-32805
2017, Synthesis and Characterization of BaFe12O19/Poly(aniline, pyrrole, ethylene terephthalate) Composites Coatings as Radar Absorbing Material (RAM), N Sasria, H Ardhyananta, R FajarinJournal of Physics Conference Series 877 (1), 012057
2017, Mechanical and thermal properties of unsaturated polyester/vinyl ester blends cured at room temperature, H Ardhyananta, FD Puspadewa, ST Wicaksono, AT Wibisono, MS&E 202 (1), 012088
2017, Precipitation Hardening Formation in Mg6Zn0. 5Y Alloy as an Engine Block Application, A Purniawan, ST Wicaksono, Key Engineering Materials 739, 220-224
Proceedings
2020, Study of Pykrete viability as protective insulation in cold storage application,PR Firdaus, Sulistijono, H Ardhyananta, AIP Conference Proceedings 2296 (1), 020082
2020, The effect of high content of nitrogen in shielding gas and filler metal on microstructures and ferrite content of tungsten inert gas multilayer welding duplex 31803, H Ardhyananta, PN Pradipta, A Purniawan, MIP Hidayat, IL Kusminah, AIP Conference Proceedings 2262 (1), 060007
2020, A study of microstructure and shape memory properties in Cu-Zn-Al by miscellaneous cooling medium during martensite formation, AT Wibisono, G Devara, D Mughni F, R Rochiem, H Ardhyananta, AIP Conference Proceedings 2251 (1), 040023
2020, Level enhancement of sound transmission class of fiber reinforced polyester composite by adding nanocellulose, M Farid, D Susanti, A Purniawan, M Ramadhani, R Efriansyah, AIP Conference Proceedings 2262 (1), 050016
2020, Deposition and post heat treatment of Ni-Al/Ni-20Cr on AISI 4140 using twin wire arc spray method, A Purniawan, DAK Hapsari, H Purwaningsih, AIP Conference Proceedings 2262 (1), 060008
2019, Characterization of vinyl ester bio-resin for core material sandwich panel construction of ship structure application: Effect of palm oil and sesame oil, H Ardhyananta, EN Sari, ST Wicaksono, H Ismail, Tuswan, A Ismail, AIP Conference Proceedings 2202 (1), 020051
2019, Preparation and Characterization of Carbon from Petung Bamboo (Dendrocalamus asper) and Ori Bamboo (Bambusa arundinacea) by Carbonization Heat Treatment, H Ardhyananta, EI Puspita, ST Wicaksono, F Pakaya, AT Wibisono, Materials Science Forum 964, 26-32
2019, Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting, H Ardhyananta, AT Wibisono, M Ramadhani, Widyastuti, M Farid, AIP Conference Proceedings 1945 (1), 020026
2019, Effect of Nanocellulose on Acoustical and Thermal Insulation Properties of Silicone Rubber Composite, M Farid, A Purniawan, D Susanti, A Rasyida, H Yulianto, M Ramadani, Materials Science Forum 964, 156-160
2019, The Effect of Deposition Time on Ag-Zn Thin Film Forming Using RF Sputtering for Antimicrobial Coating Orthopedic Devices, A Purniawan, SB Hayati, TM Atmono, R Fajarin, ST Wicaksono, Materials Science Forum 964, 246-250
2019, The Effect of Aging on Microstructure, Mechanical Properties, and Electrical Conductivity of 6061 Aluminium Alloy for Circuit Breaker, DM Fellicia, R Rochiem, MRW Putra, AD Utomo, M Rosmariana, 2019 International Conference on Technologies and Policies in Electric Power
2019, Analysis the Effect of Temperature and Holding Time of Full-Annealing Heat Treatment to Micro Structure, Mechanical Properties, and Electrical Conductivity of Aluminium Copper, DM Fellicia, R Rochman, C Changraini, Materials Science Forum 964, 280-285
2018, Nanocellulose based polymer composite for acoustical materials, M Farid, A Purniawan, D Susanti, S Priyono, H Ardhyananta, AIP Conference Proceedings 1945 (1), 020025
2018, Influence of copper composition on mechanical properties of biodegradable material Mg-Zn-Cu for orthopedic application, A Purniawan, HM Maulidiah, H Purwaningsih, AIP Conference Proceedings 1945 (1), 020010
2018, Effect of deposition time of sputtering Ag-Cu thin film on mechanical and antimicrobial properties, A Purniawan, R Hermastuti, H Purwaningsih, TM Atmono, AIP Conference Proceedings 1945 (1), 020008
2018, The effect of silver (Ag) addition to mechanical and electrical properties of copper alloy (Cu) casting product, DM Felicia, R Rochiem, SM Laia, AIP Conference Proceedings 1945 (1), 020075
2018, Morphology and inhibition performance of Ag thin film as antimicrobial coating deposited by RF-PVD on 316 L stainless steel, A Purniawan, YSA Khrisna, A Rasyida, TM Atmono, AIP Conference Proceedings 1945 (1), 020009
2017, Mechanical and Thermal Properties of Unsaturated Polyester/Vinyl Ester Blends Cured at Room Temperature, H Ardhyananta, FD Puspadewa, ST Wicaksono, AT Wibisono, IOP Conference Series: Materials Science and Engineering 202 (1), 012088
2017, Study of sigma phase in duplex SAF 2507, DM Fellicia, BA Sutarsis, DW Kurniawan, A Purniawan, AT Wibisono, IOP Conference Series: Materials Science and Engineering
Journal (in Indonesian)
2020,Pengaruh Komposisi Nikel (Ni) terhadap Kekerasan dan Struktur Mikro Paduan Baja Tahan Karat Kekuatan Tinggi Fe-C-Mn-Cr-Ni melalui Metode Proses Pengecoran Menggunakan Tungku, H Ardhyananta, A Zulfikar, A Purniawan, A Rasyida, W Widyastuti, MESIN 11 (1)
2019, Analisis Pengaruh Komposisi Aluminium (Al) Terhadap Struktur Mikro, Kekerasan dan Laju Korosi Anoda Tumbal Berbasis Seng (Zn) untuk Kapal dengan Metode Pengecoran, HM Unggul, H Ardhyananta, AT Wibisono, Jurnal Teknik ITS 7 (2), F310-F314
2017,Isolasi Selulosa dari Serat Tandan Kosong Kelapa Sawit untuk Nano Filler Komposit Absorpsi Suara: Analisis FTIR, AG Aditama, H Ardhyananta, Jurnal Teknik ITS 6 (2), F229-F232
2017, Pemisahan Selulosa dari Lignin Serat Tandan Kosong Kelapa Sawit dengan Proses Alkalisasi untuk Penguat Bahan Komposit Penyerap Suara, MA Pradana, H Ardhyananta, M Farid, Jurnal Teknik ITS 6 (2), F413-F416
2017, Analisa morfologi serat tandan kosong kelapa sawit sebagai bahan penguat komposit absorpsi suara, ME Rahmasita, M Farid, H Ardhyananta Jurnal Teknik ITS 6 (2), A787-A792
2017, Analisa Proses Pengikisan (Bleaching) dari Hasil Alkalisasi Serat Tandan Kosong Kelapa Sawit untuk Penguat Bahan Komposit Absorbsi Suara, SB Utomo, M Farid, H Nurdiansah, Jurnal Teknik ITS 6 (2), F238-F242
2017, Microstructure and Adhesion Properties Post-Annealed Metallic Coating of Fecrbmnsi on Tube and Internal Structure Coal-Fired Boiler, A Purniawan, H Irawan, ST Wicaksono, IPTEK Journal of Proceedings Series 3 (1), 98-103
2017, Pengaruh Temperatur Solution Treatment dan Aging terhadap Struktur Mikro dan Kekerasan Copperized-AISI 1006, S Sutarsis, WA Vicky, H Purwaningsih, Jurnal Matematika dan Sains 22 (1), 24-29
2017, Studi Fasa Sigma terhadap Sifat Mekanik dan Ketahanan Korosi Baja Duplex S329, DM Fellicia, BA Kurniawan, S Sutarsis, G Rabbani, Jurnal Saintek 14 (2), 57-64