Materials Innovation Laboratory

Vision-The laboratory of materials innovation aims to become a highly reputable lab and center in materials innovation and computation supported by leading researchers, while also establishing strong link and match with and delivering state of the art and innovative solutions to related industries. Activities-Our lab is promoting and conducting all learning, research and service activities mainly related to ideas and aspects of material innovation. Based on the fact, our lab is accredited as lab based education (LBE) lab by LPPM ITS Surabaya since 2016 (based on decree 061238/IT2.11/TU.00.09/2016). Having the LBE status, our lab becomes frontier in materials research. In fact, in 2018 our lab has been ranked as the 2^nd best LBE lab in term of publication productivity by LPPM ITS (based on decree 010596/IT2.VII/TU.00.08/2018). In research, our lab focuses on biomaterials, polymers, composites and material modeling and simulations. In addition, most of lecturers in our lab are also as reviewers for some leading international journals, while our lab members have produced some patents as well.  For students, our lab has become one of ANTASENA team home-bases to support their activities (ANTASENA is a prototype racing car utilizing hydrogen fuel. The team is fully supported by ITS Surabaya).

Monographs   B-Spline Collocation with Domain Decomposition Method and Its Application for Singularly Perturbed Convection-Diffusion Problems, Year: 2015 | ISBN: 978-981-287-128-2, Publisher: Springer International Publishing, Switzerland |Link: https://link.springer.com/chapter/10.1007/978-981-287-128-2_3 System Identification Technique and Neural Networks for Material Lifetime Assessment Application, Year: 2015 | ISBN: 978-3-319-12883-2, Publisher: Springer International Publishing, Switzerland |Link: https://link.springer.com/chapter/10.1007/978-3-319-12883-2_27 3D Finite Element Simulation of T-Joint Fillet Weld: Effect of Various Welding Sequences on the Residual Stresses and Distortions, Year: 2012 | ISBN: 978-953-51-0749-1, Publisher: IntechOpen |Link: https://www.intechopen.com/books/numerical-simulation-from-theory-to-industry/3d-finite-element-simulation-of-t-joint-fillet-weld-effect-of-various-welding-sequences-on-the-resid Optimizing Neural Network Prediction of Composite Fatigue Life under Variable Amplitude Loading using Bayesian Regularization, Year: 2009 | ISBN: 9781420093322, Publisher: CRC Press, Taylor and Francis, LLC, USA| Link: https://www.taylorfrancis.com/books/e/9781420093339/chapters/10.1201%2F9781420093339-14   Journals   2020, A meshless generalized finite difference method for 2D elasticity problems, MIP Hidayat, R Fajarin Engineering Analysis with Boundary Elements 117, 89-103 2020, Effects of Sample Shapes and Thickness on Distribution of Temperature inside the Mineral Ilmenite Due to Microwave Heating, MIP Hidayat, DM Felicia, FI Rafandi, A Machmudah, Minerals 10 (4), 382 2019, Meshless local B-spline collocation method for heterogeneous heat conduction problems, MIP Hidayat, Engineering Analysis with Boundary Elements 101, 76-88 2019, Study of Lateral Vibration of Drilling String with Mass Imbalance Using Finite Element, S Irawan, AK Shanmugam, MIP Hidayat, TR Biyanto, International Journal on Advanced Science, Engineering and Information 2018    A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials, International Journal of Computational Methods, 15(2), 1850007-1 - 1850007-34 2017    Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems with Nonhomogenous and Time-Dependent Heat Sources, ASME Journal of Heat Transfer, 139(7), 071302-1 - 071302-11 2017    Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine, Science and Engineering of Composite Materials, 24(6), 875-882 2017    Effects of different metals on the synthesis and properties of waterborne polyurethane composites containing pyridyl units, Polymer Bulletin, 74, 1121–1143 2017    Influence of internal geometry on mechanical properties of 3d printed polylactic acid (pla) material, International Journal of Engineering Sciences & Research Technology, 6(8), pp. 230-238 2017    Effect of Screw Diameter in Femoral Fracture Fixation Modeled by Finite Element Method, IPTEK The Journal for Technology and Science , 28(1), pp. 20-29 2017    Mechanical Properties and Thermal Stability of Epoxy/RTV Silicone Rubber, IPTEK The Journal for Technology and Science, 28(1), pp. 7 – 14 2016    B-spline collocation method for boundary value problems in complex domains, International Journal of Computing Science and Mathematics, 7(2), 110-125 2016    Mechanical properties of urethane diacrylate/bamboo powder composite fabricated by rapid prototyping system, Rapid Prototyping Journal, 22(4), 676-683 2015    A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems, 25(2), 225-251 2015    Process parameters optimization for area-forming rapid prototyping system, Rapid Prototyping Journal, 21(1), 70-78 2015    Mechanical and thermal properties of photopolymer/CB (carbon black) nanocomposite for rapid prototyping, Rapid Prototyping Journal, 21(3), 262-269 2015    Preparation of Natural Hydroxyapatite from Bovine Femur Bones Using Calcination at Various Temperatures, Procedia Manufacturing, 2, 196-201 2014    Meshless local B-spline-FD method and its application for 2D heat conduction problems with spatially varying thermal conductivity, 242, 236-254 2013    Morphology and properties of a photopolymer/clay nanocomposite prepared by a rapid prototyping system, Science and Engineering of Composite Materials, 21(2), 205–210 2013    Biocompatibility of organically modified nanocomposites based on PBAT, J Polym Res, 20: 302 2013    Characterization, degradation and biocompatibility of PBAT based nanocomposites, Applied Clay Science, 80–81, 291-298 2012    PBAT based nanocomposites for medical and industrial applications, Materials Science and Engineering: C, 32(6), 1331-1351 2011    Model of neural networks with sigmoid and radial basis functions for velocity-field reconstruction in fluid-structure interaction problem, Journal of Applied Sciences, 11(9), 1587-1593   Proceedings   2020, Microstructural characterization of super duplex stainless steel UNS S32760 after heat treatment in different cooling media, AD Halimi, Sulistijono, MIP Hidayat, AIP Conference Proceedings 2296 (1), 020077 2019, On Impact Problems Of Projectile Using Meshless Peridynamics Analysis, MIP Hidayat, IOP Conference Series: Materials Science and Engineering 547 (1), 012019 2019, Numerical Simulation on Effects of TCO Work Function on Performance of a-Si: H Solar Cells, A Sholih, D Hamdani, ST Wicaksono, MIP Hidayat, Y Cahyono, Materials Science Forum 966, 501-506 2019, Finite Element Simulation of Delamination in Carbon Fiber/Epoxy Laminate Using Cohesive Zone Model: Effect of Meshing Variation, VD Waas, MIP Hidayat, L Noerochim, Materials Science Forum 964, 257-262 2019, Experimental Analysis on The Tensile Strength of Polyester Resin based Calcium Carbonate Powder and E-Glass Fibre Reinforced Composite, ST Wicaksono, H Ardhyananta, MB Waluyo, IOP Conference Series: Materials Science and Engineering 546 (4), 042046 2019, Effect of Calcium Carbonate on The Tensile and Density Properties of Kenaf/Polyester Hybrid Composite, ST Wicaksono, AH Laksana, H Ardhyananta, IOP Conference Series: Materials Science and Engineering 546 (4), 042019 2019, The Enhancement of Compressive Strength of Cement-Based Composite Filled with LDPE/PET/Styrofoam Aggregates as Candidate for Breakwater Application, ST Wicaksono, MIP Hidayat, A Widodo, A Taufiq, IOP Conference Series: Materials Science and Engineering 515 (1), 012031 2019, Magneto-Thermal Effect in Mn0. 25Fe2. 75O4-PEG Nanoparticles and Their Potential as Hyperthermia Therapy, K Saputra, A Hidayat, CI Yogihati, ST Wicaksono, N Hidayat, S Hidayat, IOP Conference Series: Materials Science and Engineering 515 (1), 012008 2019, A Preliminary Study on the Thermo-optics Characteristics of Chromium Ferrite Ferrofluids, A Hidayat, W Elyani, A Taufiq, ST Wicaksono, IOP Conference Series: Materials Science and Engineering 515 (1), 012087 2019, Numerical Simulation on Effects of TCO Work Function on Performance of a-Si: H Solar Cells, A Sholih, D Hamdani, ST Wicaksono, MIP Hidayat, Y Cahyono, Materials Science Forum 966, 501-506 2019, Study of the Effect of PP and LDPE Thermoplastic Binder Addition on the Mechanical Properties and Physical Properties of Particulate Composites for Building Material Application, ST Wicaksono, H Ardhyananta, A Rasyida, F Fadila Rifki, Materials Science Forum 964, 115-123 2019, Preliminary Characterization of Hydrogel Composite Alginate/PVA/r-GO as an Injectable Materials for Medical Applications, A Rasyida, YMT Silaen, ST Wicaksono, H Ardyananta, H Nurdiansah, Materials Science Forum 964, 161-167 2019, Preliminary study of alginates extracted from brown algae (Sargassum sp.) available in Madura Island as composite based hydrogel materials, A Rasyida, T Rizkha Pradipta, S Tri Wicaksono, V Mitha Pratiwi, Materials Science Forum 964, 240-245 2018    Numerical simulation of temperature distribution in cylindrical ilmenite (FeTiO3) due to microwave heating, AIP Conference Proceedings, 1945(1), 020018-1 - 020018-6 2018    Simulation of impact ballistic of Cu-10wt%Sn frangible bullet using smoothed particle hydrodynamics, AIP Conference Proceedings, 1945(1), 020020-1 - 020020-5 2018    Prediction of composite fatigue life under variable amplitude loading using artificial neural network trained by genetic algorithm. AIP Conference Proceedings, 1945(1), 020019-1 - 020019-7 2018    Internal geometry effect of structured PLA materials manufactured by dropplet-based 3D printer on its mechanical properties, AIP Conference Proceedings, 1945(   1), 020065-1 - 020065-9 2018    Study on mechanical and physical properties of composite materials with recycled PET as fillers for paving block application, AIP Conference Proceedings, 1945(1), 20066-1 - 20066-6 2018    Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting, AIP Conference Proceedings, 1945(1), 020026-1 - 020026-6 2018    Nanocellulose based polymer composite for acoustical materials, AIP Conference Proceeding, 1945(1), 020025-1 - 020025-6 2018    Morphology and inhibition performance of Ag thin film as antimicrobial coating deposited by RF-PVD on 316 L stainless steel, AIP Conference Proceedings, 1945(           1), 020009-1 - 020009-8 2017 Synthesis and Characterization of BaFe12O19/Poly(aniline, pyrrole, ethylene terephthalate) Composites Coatings as Radar Absorbing Material (RAM), J. Phys.: Conf. Ser. 877 012057 2017    Effect of chitosan addition to characteristic and antimicrobial activity of zinc doped hydroxyapatite, IOP Conf. Series: Materials Science and Engineering , 223, 1-8 2017    Precipitation Hardening Formation in Mg6Zn0.5Y Alloy as an Engine Block Application, Key Engineering Materials, 739, pp.220-224 2017 Effect of casing imperfection on the casing strength in steam injection wells, IOP Conf. Ser.: Mater. Sci. Eng. 267 012019 2016 Casing strength degradation in thermal environment of steam injection wells, J. Phys.: Conf. Ser. 710, 012017   Journals (In Indonesian) 2020, Simulasi Delaminasi pada Komposit Glass Fiber-reinforced Polymer (GFRP) dan Carbon Fiber-reinforced Polymer Menggunakan Metode Cohesive Zone Model (CZM) dan Virtual Crack, DB Setiawan, MIP Hidayat, W Widyastuti, Jurnal Teknik ITS 9 (1), B1-B6 2020, The Effect of Gamma Irradiation on HDPE/HA Composite as Candidate Material Dental Implant, P Gultom, ST Wicaksono, A Purniawan, S Sudirman, SG Sukaryo, IPTEK The Journal for Technology and Science 31 (1), 25-32 2020, Simulasi Perambatan Retak pada Baja dan Aluminium Akibat Pembebanan Statis dengan Menggunakan Metode Elemen Hingga, NS Lande, MIP Hidayat, W Jatimurti, Jurnal Teknik ITS 8 (2), F188-F193 2020, Analisa Faktor Intensitas Tegangan dan Usia Siklus pada Simulasi Perambatan Retak Komponen Poros Menggunakan Metode Smart Crack Growth, AF Wibowo, MIP Hidayat, R Rochiem, Jurnal Teknik ITS 8 (2), F121-F126 2019, Pengaruh Komposisi Filler Limbah Polypropylene dan Sekam Padi terhadap Sifat Fisis dan Mekanik Komposit untuk Aplikasi Papan Semen Partikel, ST Wicaksono, MIP Hidayat, Jurnal Teknik ITS 8 (2), D98-D105 2019, Studi Pengaruh Penambahan PVA dan Bentonit Terhadap Morfologi dan Sifat Fisik Komposit Berbasis Hidrogel Alginat Sebagai Kandidat Material Perancah Untuk Regenarasi Tulang Rawan, A Rasyida, T Rizkha Pradipta, ST Wicaksono, Jurnal Teknik ITS 7 (2), 320-325 2018    Pengaruh Penambahan Serat Cangkang Kelapa Sawit (Palm Kernel Fiber) Terhadap Sifat Mekanik Dan Stabilitas Termal Komposit Epoksi/Serat Cangkang Kelapa Sawit, Jurnal Teknik ITS , 7(1), 119-123 2018    Studi Pengaruh Penambahan Binder Thermoplastic LDPE dan PET Terhadap Sifat Mekanik Komposit Partikulat untuk Aplikasi Material Bangunan, Jurnal Teknik ITS         7(1), 26-31 2018    Analisis Hasil Simulasi Sifat Mekanik Single Walled Carbon Nanotube dengan Metode Elemen Hingga, Jurnal Teknik ITS, 7(1), 73-78 2018    Simulasi Springback pada Laser Beam Bending dan Rotary Draw Bending untuk Pipa AISI 304L, Jurnal Teknik ITS, 7(1), 108-112 2018    Simulasi Proses Pemotongan Bubut Baja Karbon Rendah Aisi 1018 dengan Mesin Bubut Menggunakan Metode Elemen Hingga, Jurnal Teknik ITS, 7(1), 85-90 2018    Studi Pengaruh Tubing pada Performa In-Situ Well Repair Menggunakan Material Polyacrylamide dengan Coupled CFD-FEM, Jurnal Teknik ITS, 7   (1), 62-67 2018    Analisis Pengaruh Flow Rate dan Pressure pada In Situ Well Repair Menggunakan Material Polyacrylamide dengan CFD-FEM Coupling Method, Jurnal Teknik ITS, 7(  1), 79-84 2018    Studi Optimisasi Heat Flux dan Welding Speed pada Pengelasan Laser Fiber terhadap Lebar Lasan, Kedalaman Penetrasi dan Tegangan Sisa Esshete 1250 dengan Metode Elemen Hingga, Jurnal Teknik ITS, 7(1), 102-107   PATENTS (IN INDONESIAN)   No P00201406512       Proses Pembuatan Karbon Hitam Dengan Cara Vakum (Publikasi) No P00201406522       Material Komposit Serat Bambu Untuk Penyerap Suara Yang Tidak Mudah Terbakar No P00201304783       Metode Perlakuan Panas untuk Peningkatan Kekuatan Mekanik Bambu No P00201304791       Komposit Berserat Rami Untuk Bahan Peredam Suara dan Proses Pembuatannya

Email: irfan@mat-eng.its.ac.id