Academic
Study Program
Riset and Collaborations
| No | Judul Artikel | Nama Penulis | Nama Jurnal |
| 1 | Failure Investigation of a High-Temperature Cast Soot Blower Lance Tube Nozzle | Budi Agung Kurniawan | Journal of Failure Analysis and Prevention |
| 2 | Manipulation of Nitrogen-Heteroatom Configuration for Enhanced Charge-Storage Performance and Reliab | Sutarsis | ACS Applied Materials and Interfaces |
| 3 | The strength of polylactic acid composites reinforced with sugarcane bagasse and rice husk | Hariyati Purwaningsih | Materials Science Forum |
| 4 | Effect of sintering temperature on morphology, mechanicai properties and degradation rate of magnesi | Agung Purniawan Amaliya Rasyida Sigit Tri Wicaksono Hariyati Purwaningsih | Journal of Computational and Theoretical Nanoscience |
| 5 | Synthesis of ZnO/rGO/TiO2 Composite and Its Photocatalytic Activity for Rhodamine B Degra | Hariyati Purwaningsih Diah Susanti | IOP Conference Series: Materials Science and Engineering |
| 6 | Effective beneficiation of low content nickel ferrous laterite using fluxing agent through Na2< | Yuli Setiyorini Sungging Pintowantoro Fakhreza Abdul | Materialwissenschaft und Werkstofftechnik |
| 7 | Tangential X-Ray Radiography for Pitting Geometry Analysis of Outside Wall of Insulated Steel Pipes | Sulistijono | Russian Journal of Nondestructive Testing |
| 8 | A meshless generalized finite difference method for 2D elasticity problems | Widyastuti Mas Irfan Purbawanto Hidayat Rindang Fajarin | Engineering Analysis with Boundary Elements |
| 9 | MnO2 Nanoparticles Prepared by Alternating Monopolar Arrangement Electrolysis and Their E | Hariyati Purwaningsih | IOP Conference Series: Materials Science and Engineering |
| 10 | Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure, | Hariyati Purwaningsih | Polymer Testing |
| 11 | Effects of sample shapes and thickness on distribution of temperature inside the mineral ilmenite du | Mas Irfan Purbawanto Hidayat | Minerals |
| 12 | Design for temperature distribution of continuous furnace system for sintering application | Wikan Jatimurti Vania Mitha Pratiwi Widyastuti | IOP Conference Series: Earth and Environmental Science |
| 13 | Direct reduction of nickel laterite limonitic ore using a coal-dolomite mixture bed and Na2</in | Fakhreza Abdul Sungging Pintowantoro | Journal of Chemical Technology and Metallurgy |
| 14 | The Rate of HF Formation During Addition of Alumina to NaF-AlF3 Melts | Dian Mughni Fellicia | Minerals, Metals and Materials Series |
| 15 | High oxygen reduction reaction activity on various iron loading of Fe-PANI/C catalyst for PEM fuel c | Diah Susanti Lukman Noerochim | Ionics |
| No | Judul Artikel | Nama Penulis | Nama Jurnal |
| 1 | The Effect of Aging on Microstructure, Mechanical Properties, and Electrical Conductivity of 6061 Al | Dian Mughni Fellicia, Rochman Rochiem | 2019 International Conference on Technologies and Policies in Electric Power and Energy, TPEPE 2019 |
| 2 | High stability on N-doped LiFePO4/C as cathode of lithium-ion battery | Lukman Noerochim. Diah Susanti | AIP Conference Proceedings |
| 3 | Characterization of vinyl ester bio-resin for core material sandwich panel construction of ship structur | Sigit Tri Wicaksono, Hosta Ardhyananta | AIP Conference Proceedings |
| 4 | High electrochemical performance of F-doped LiFePO4 as cathode for lithium-ion battery | Diah Susanti, Lukman Noerochim | AIP Conference Proceedings |
| 5 | Improvement of compressive strength of Mg-Fe-Ca alloy by heat treatment as biodegradable implant | Sigit Tri Wicaksono, Amaliya Rasyida, Agung Purniawan | AIP Conference Proceedings |
| 6 | The study of the distribution and deformation of burden layer in 250 ton/day mini blast furnace using | Fakhreza Abdul, Mas Irfan Purbawanto Hidayat, Sungging Pintowantoro | International Journal on Advanced Science, Engineering and Information Technology |
| 7 | Structural evaluation on sugarcane bagasse treated using sodium and calcium hydroxide | Hariyati Purwaningsih | E3S Web of Conferences |
| 8 | Physical, tensile, and biodegradability properties of cross-linked polyvinyl alcohol/palm kernel she | Hosta Ardhyananta | BioResources |
| 9 | Selective reduction of laterite nickel ore | Fakhreza Abdul, Sungging Pintowantoro | Materials Transactions |
| 10 | On Impact Problems of Projectile Using Meshless Peridynamics Analysis | Mas Irfan Purbawanto Hidayat | IOP Conference Series: Materials Science and Engineering |
| 11 | The Preparation of Electrical Double Layer Capacitor (EDLC) from Boron-doped Reduced-Graphene Oxide | Hosta Ardhyananta, Hariyati Purwaningsih, Diah Susanti | IOP Conference Series: Materials Science and Engineering |
| 12 | Effect of Addition Tahongai Leaf Extract (Kleinhovia hospita Linn.) As Organic Inhibitor on 1040 AIS | Sulistijono | IOP Conference Series: Materials Science and Engineering |
| 13 | The effect of deposition time on ag-zn thin film forming using rf sputtering for antimicrobial coating | Rindang Fajarin, Sigit Tri Wicaksono, Agung Purniawan | Materials Science Forum |
| 14 | Analysis of cylindrical briquette dimension on total iron content and the degree of metallization in | Sungging Pintowantoro, Fakhreza Abdul | Materials Science Forum |
| 15 | Study of the effect of pp and ldpe thermoplastic binder addition on the mechanical properties and ph | Sigit Tri Wicaksono, Amaliya Rasyida, Hosta Ardhyananta | Materials Science Forum |
| 16 | Effect of rgo addition toward photocatalyst properties of zno/rgo/tio2 for rhodamine b degradation | Hariyati Purwaningsih, Diah Susanti | Materials Science Forum |
| 17 | Effect of nanocellulose on acoustical and thermal insulation properties of silicone rubber composite | Amaliya Rasyida, Agung Purniawan, Moh. Farid, Diah Susanti | Materials Science Forum |
| 18 | Analysis of large bell angle in double bell system on burden material distribution and layer deforma | Fakhreza Abdul, Mas Irfan Purbawanto Hidayat, Sungging Pintowantoro | Materials Science Forum |
| 19 | Nanocarbon from rice straw as supercapacitor electrode | Vania Mitha Pratiwi | Materials Science Forum |
| 20 | The study of additive variation in smelting process of sponge iron into pig iron on the fe content a | Fakhreza Abdul, Sungging Pintowantoro | Materials Science Forum |
| 21 | Preparation and characterization of carbon from petung bamboo (Dendrocalamus asper) and ori bamboo | Hosta Ardhyananta Alvian Toto Wibisono Sigit Tri Wicaksono | Materials Science Forum |
| 22 | Investigation of carbon composition for electrochemical properties as pemfc cathode catalyst | Lukman Noerochim Diah Susanti | Materials Science Forum |
| 23 | Preliminary characterization of hydrogel composite alginate/pva/r-go as an injectable materials for | Sigit Tri Wicaksono Amaliya Rasyida | Materials Science Forum |
| 24 | Effect of high loading glycine on fe2o3 nano oval as anode for lithium-ion battery | Lukman Noerochim Budi Agung Kurniawan | Materials Science Forum |
| 25 | Finite element simulation of delamination in carbon fiber/epoxy laminate using cohesive zone model | Mas Irfan Purbawanto Hidayat Lukman Noerochim | Materials Science Forum |
| 26 | Characterization of nasicon structure prepared with titanium dioxide doping for nox gas sensor applied | Widyastuti Hariyati Purwaningsih Vania Mitha Pratiwi | Materials Science Forum |
| 27 | Preliminary study of alginates extracted from brown algae (Sargassum sp.) available in madura island | Vania Mitha Pratiwi Sigit Tri Wicaksono Amaliya Rasyida | Materials Science Forum |
| 28 | Analysis the effect of temperature and holding time of full-annealing heat treatment to micro struct | Rochman Rochiem Dian Mughni Fellicia | Materials Science Forum |
| 29 | Adsorption performance of li1.6mn1.67o4 for lithium extraction from geothermal fluid of lumpur sidoarjo | Rindang Fajarin Lukman Noerochim | Materials Science Forum |
| 30 | Effect of ph, rotation speed and imidazoline-paracetamol based inhibitor volume ratio on corrosion | Budi Agung Kurniawan Vania Mitha Pratiwi | Materials Science Forum |
| 31 | Porous silica nanomaterial derived from organic waste rice husk as highly potential drug delivery | Vania Mitha Pratiwi Hariyati Purwaningsih Agung Purniawan, Diah Susanti | Materials Science Forum |
| 32 | Experimental Analysis on the Tensile Strength of Polyester Resin based Calcium Carbonate Powder and | Sigit Tri Wicaksono Hosta Ardhyananta | IOP Conference Series: Materials Science and Engineering |
| 33 | Effect of Acetone/Isopropanol as Solvent TiO2 Active Flux on Penetration Characteristics | Agung Purniawan Hosta Ardhyananta | IOP Conference Series: Materials Science and Engineering |
| 34 | Effect of Calcium Carbonate on the Tensile and Density Properties of Kenaf/Polyester Hybrid Composit | Hosta Ardhyananta Sigit Tri Wicaksono | IOP Conference Series: Materials Science and Engineering |
| 35 | Synthesis and characterization of mesoporous silica nanoparticles (MSNp) MCM 41 from natural waste | Vania Mitha Pratiwi Diah Susanti Rochman Rochiem | IOP Conference Series: Materials Science and Engineering |
| 36 | Efficiency and characterization study of low voltage current sacrificial anode on Al-Zn-Cu and Al-Zn | Sulistijono | IOP Conference Series: Materials Science and Engineering |
| 37 | Reversible ON/OFF switching of photoluminescence from CsPbX3 quantum dots coated with sil | Azzah Dyah Pramata | Chemical Communications |
| 38 | Modeling and experimental study of Al-Cu alloy sand casting for circuit breaker | Mas Irfan Purbawanto Hidayat Alvian Toto Wibisono Rochman Rochiem Dian Mughni Fellicia | International Journal on Advanced Science, Engineering and Information Technology |
| 39 | Study of lateral vibration of drilling string with mass imbalance using finite element | Mas Irfan Purbawanto Hidayat | International Journal on Advanced Science, Engineering and Information Technology |
| 40 | Formation of Carbon Fibres from Polymer Poly(vinyl alcohol)/Acetylene Black using Electrospinning Me | Hariyati Purwaningsih | IOP Conference Series: Materials Science and Engineering |
| 41 | High electrochemical performance of Li4Ti5O12/C synthesized by ball | Widyastuti Diah Susanti, Lukman Noerochim | Ionics |
| 42 | Analysis on the effect of pressure and mass fraction of chromium to mechanical properties and electro | Lukman Noerochim | International Journal of Microstructure and Materials Properties |
| 43 | A Preliminary Study on the Thermo-optics Characteristics of Chromium Ferrite Ferrofluids | Sigit Tri Wicaksono | IOP Conference Series: Materials Science and Engineering |
| 44 | The Enhancement of Compressive Strength of Cement-Based Composite Filled with LDPE/PET/Styrofoam Agg | Sigit Tri Wicaksono, Mas Irfan Purbawanto Hidayat | IOP Conference Series: Materials Science and Engineering |
| 45 | Effect of Cetyl Trimethyl Ammonium Bromide as Template of Mesoporous Silica MCM-41 from Rice Husk by | Vania Mitha Pratiwi, Hariyati Purwaningsih, Agung Purniawan, Diah Susanti | IOP Conference Series: Materials Science and Engineering |
| 46 | Synthesis and electrochemical performance of �±-Fe2O3 nano ellipse as anode fo | Diah Susanti, Lukman Noerochim, Tubagus Noor Rohmannudin | Asian Journal of Chemistry |
| 47 | Meshless local B-spline collocation method for heterogeneous heat conduction problems | Mas Irfan Purbawanto Hidayat | Engineering Analysis with Boundary Elements |
| 48 | Deformation and failure of sugarcane bagasse reinforced PP | Hariyati Purwaningsih | European Polymer Journal |
| 49 | Synthesis of dual-phase Li4Ti5O12-TiO2nanowires as anode | Lukman Noerochim, Hariyati Purwaningsih | Ionics |
| 50 | Effect of degassing time and cooling rate on microstructure and porosity of aluminum 6061 alloy usin | Alvian Toto Wibisono, Wikan Jatimurti | Materials Science Forum |
| No | Judul Artikel | Nama Penulis | Nama Jurnal |
| 1 | A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials | Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan | International Journal of Computational Methods: 15(2) pp 18500071-34 2018 |
| 2 | Ni and Zn Substituted M-type Barium Hexaferrite Processed by Sol–Gel Auto Combustion Method | Widyastuti, Vania Mitha Pratiwi, M. Febri Dwi | Journal of Physics, 877 (12015), 2018, terindex Scopus |
| 3 | Comparison of corrosion inhibitor performance based on green corrosion inhibitor of extract leaf tobacco and commercial imidazoline inhibitor in a sweet environment at carbon steel AISI 1045 in NaCl 3.5% solution | Mochamad Alvan Mifta Chusururi, Budi Agung Kurniawan, Lukman Noerochim | Journal of Applied and Physical Sciences 4(11) pp 14-24, 2018 (tidak terindex scopus) |
| 4 | Pelapisan FeCrMnNiSi pada Grey Cast Iron FC 25 Variabel Tekanan Gas pada Metode Thermal Arc Spray | Hariyati Purwaningsih, Agung Purniawan, Rifqi Tantyo Putra | Jurnal Ilmu Dasar Vol 19(1) pp 29-36, 2018 (NASIONAL) |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Hosta A, Amaliya R |
| 2 | Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R |
| 3 | INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Hosta A, Amaliya R, Mas Irfan PH |
| 4 | The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R |
| 5 | Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal |
| 6 | Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | M. Nur Rohman, Mas Irfan PH, Agung Purniawan |
| 7 | Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rezza Ruzzuqi, Mas Irfan PH, Widyastuti |
| 8 | Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Mas Irfan PH, Widyastuti, Peniel Simaremare |
| 9 | Effect of casing imperfection on the casing strength in steam injection wells | 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 | Mas Irfan PH, Sonny Irawan, Muhamad Zaki A |
| 10 | Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul |
| 11 | Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Yuli Setiyorini, Fanny Leestiana, Agung Purniawan |
| 12 | New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | M. Arief Setyawan Sungging Pintowantoro, Fakhreza Abdul |
| 13 | Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fakhreza Abdul, Sungging Pintowantoro, Adji Kawigraha |
| 14 | Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fakhreza Abdul, Sungging Pintowantoro, Ridwan Bagus |
| 15 | Nanocellulose Based Polymer Composite for Acoustical Materials | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Moh. Farid, Agung Purniawan, Diah Susanti |
| 16 | Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono |
| 17 | Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih |
| 18 | Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono |
| 19 | Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of AISI 1045 Steel in 3.5% NaCl Environment | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi |
| 20 | A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti |
| 21 | Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi |
| 22 | Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Dika Anggara, Diah Susanti |
| 23 | Porous Micro Sphere Fe2O3 as Anode for Lithium Ion Batteries | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Diah Susanti, Achmad Subhan |
| 24 | Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Diah Susanti, Amien Widodo |
| 25 | Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono |
| 26 | Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Yoel Rizky, Sulistijono, Eli Novita |
| 27 | Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel | 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 | Aji Ridhotullah, Sulistijono, Rahmat Ashari |
| 28 | Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fadil Azhar Ekoputra, Sulistijono, Ika Ismail |
| 29 | Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) - Polyester | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Ammar Farhan Rayudi, Sulistijono, Firman Sidiq |
| 30 | Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Firman Sidiq, Sulistijono, Ika Ismail |
| 31 | The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali |
| 32 | Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali |
| 33 | Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Eli Novita Sari, Sulistijono, Yoel Rizky |
| 34 | The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Iqbal Huda Sihotang, Sulistijono, Ika Ismail |
| 35 | Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Haniffudin Nurdiansyah |
| 36 | FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah |
| 37 | The Effect of Weight Fraction Fe2O3:TiO2 and Temperature Process of Pseudobrookite Synthesize (Fe2TiO5) on Optical and Electrical Properties | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti |
| 38 | The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi |
| 39 | Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rindang Fajarin, Amelthya Rahel, Widyastuti |
| 40 | Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Widyastuti |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics | Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 | Mas Irfan PH, Widyastuti, Peniel Simaremare |
| 2 | ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B | Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 | Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan |
| 3 | The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor | TACT 2017 International Thin Films Conference, Hualien, Taiwan | Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R |
| 4 | PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY | Seminar Nasional Fisika ke II | Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah |
| 5 | Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat | Seminar Nasional Fisika ke II | Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem |
| No | Judul Artikel | Nama Penulis | Nama Jurnal |
| 1 | Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources | Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Tadimalla V L N Rao | ASME Journal of Heat Transfer |
| 2 | A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials | Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan | International Journal of Computational Methods |
| 3 | Mechanical Properties and Thermal Stability of Epoxy/RTV Silicone Rubber | Fahriadi Pakaya, Hosta Ardhyananta, Sigit Tri Wicaksono | IPTEK The Journal for Technology and Science |
| 4 | Effect of Screw Diameter in Femoral Fracture Fixation Modeled by Finite Element Method | Muhammad Nashrullah, Belladina Clara Shinta, Mas Irfan P. Hidayat, Agung Purniawan, Yuli Setiyorini | IPTEK The Journal for Technology and Science |
| 5 | Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine | ST Wicaksono, SH Chiu, KT Chen | Science and Engineering of Composite Materials Vol 24 issue 6, 2017 |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Hosta A, Amaliya R |
| 2 | Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R |
| 3 | INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sigit TW, Hosta A, Amaliya R, Mas Irfan PH |
| 4 | The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R |
| 5 | Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal |
| 6 | Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | M. Nur Rohman, Mas Irfan PH, Agung Purniawan |
| 7 | Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rezza Ruzzuqi, Mas Irfan PH, Widyastuti |
| 8 | Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Mas Irfan PH, Widyastuti, Peniel Simaremare |
| 9 | Effect of casing imperfection on the casing strength in steam injection wells | 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 | Mas Irfan PH, Sonny Irawan, Muhamad Zaki A |
| 10 | Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul |
| 11 | Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Yuli Setiyorini, Fanny Leestiana, Agung Purniawan |
| 12 | New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | M. Arief Setyawan Sungging Pintowantoro, Fakhreza Abdul |
| 13 | Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fakhreza Abdul, Sungging Pintowantoro, Adji Kawigraha |
| 14 | Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fakhreza Abdul, Sungging Pintowantoro, Ridwan Bagus |
| 15 | Nanocellulose Based Polymer Composite for Acoustical Materials | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Moh. Farid, Agung Purniawan, Diah Susanti |
| 16 | Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono |
| 17 | Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih |
| 18 | Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono |
| 19 | Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of AISI 1045 Steel in 3.5% NaCl Environment | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi |
| 20 | A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti |
| 21 | Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi |
| 22 | Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Dika Anggara, Diah Susanti |
| 23 | Porous Micro Sphere Fe2O3 as Anode for Lithium Ion Batteries | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Diah Susanti, Achmad Subhan |
| 24 | Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Lukman Noerochim, Diah Susanti, Amien Widodo |
| 25 | Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono |
| 26 | Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Yoel Rizky, Sulistijono, Eli Novita |
| 27 | Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel | 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 | Aji Ridhotullah, Sulistijono, Rahmat Ashari |
| 28 | Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Fadil Azhar Ekoputra, Sulistijono, Ika Ismail |
| 29 | Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) - Polyester | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Ammar Farhan Rayudi, Sulistijono, Firman Sidiq |
| 30 | Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Firman Sidiq, Sulistijono, Ika Ismail |
| 31 | The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali |
| 32 | Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali |
| 33 | Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Eli Novita Sari, Sulistijono, Yoel Rizky |
| 34 | The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Iqbal Huda Sihotang, Sulistijono, Ika Ismail |
| 35 | Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Haniffudin Nurdiansyah |
| 36 | FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah |
| 37 | The Effect of Weight Fraction Fe2O3:TiO2 and Temperature Process of Pseudobrookite Synthesize (Fe2TiO5) on Optical and Electrical Properties | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti |
| 38 | The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi |
| 39 | Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Rindang Fajarin, Amelthya Rahel, Widyastuti |
| 40 | Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn | The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 | Widyastuti |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics | Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 | Mas Irfan PH, Widyastuti, Peniel Simaremare |
| 2 | ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B | Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 | Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan |
| 3 | The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor | TACT 2017 International Thin Films Conference, Hualien, Taiwan | Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R |
| 4 | PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY | Seminar Nasional Fisika ke II | Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah |
| 5 | Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat | Seminar Nasional Fisika ke II | Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem |
| NO | JUDUL MAKALAH | JURNAL | INDEX | PENULIS | |
| 1 | Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery | Ionics 22, no. 3 (2016): 341-346. | SCOPUS | Lukman Noerochim, Ade Okta Yurwendra, and Diah Susanti | |
| 2 | Building Glass OITC in Warm Temperature | Procedia Engineering 145 (2016): 630-637. | SCOPUS | Mediastika, Christina, Luciana Kristanto, Juliana Anggono, Fefen Suhedi, and Hariyati Purwaningsih. | |
| 3 | Effect of Nano-BaTiO3 on Thermal, Mechanical and Electrical Properties of HDDA/TPA Prepared by a Digital Light Processor RP Machine | Science and Engineering of Composite Materials. | SCOPUS | Sigit Tri Wicaksono, Shih-Hsuan Chiu, Kun-Ting Chen, and Sheng-Hong Pong | |
| 4 | Mechanical Properties of Urethane Diacrylate/Bamboo Fiber Composite Fabricated by Rapid Prototyping System | Rapid Prototyping Journal 21, no. 3 (2015): 262-269. | SCOPUS | Chiu, Shih-Hsuan, Sigit Tri Wicaksono, Kun-Ting Chen, Chiu-Yen Chen, and Sheng-Hong Pong | |
| 5 | Morphology of TiAlN Thin Film onto HSS as Cutting Tools by Using Mosaic-Styled Target RF Sputtering Method | The Journal of Pure and Applied Chemistry Research 5, no. 2 (2016). | BUKAN SCOPUS | Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, and Tri Mardji Atmono | |
| 6 | B-spline collocation method for boundary value problems in complex domains | International Journal of Computing Science and Mathematics 7.2 (2016): 110-125. | SCOPUS | Mas Irfan P Hidayat., Bambang Ariwahjoedi, and Setyamartana Parman | |
| 7 | Casing strength degradation in thermal environment of steam injection wells | Journal of Physics: Conference Series, vol. 710, no. 1, p. 012017. IOP Publishing, 2016. | SCOPUS | Hidayat, M. I. P., S. Irawan, and Mohamad Zaki Abdullah | |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Growth Temperature and Holding Time | The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016. | Diah Susanti, Mavindra Ramadhani, Hariyati Purwaningsih, Haniffudin Nurdiansah |
| 2 | “The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Various Mass Aluminum Powder and Sputter Time” | The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016. | Diah Susanti, Ice Trianiza, Hariyati Purwaningsih, Haniffudin Nurdiansah |
| 3 | Effect of Post Annealing on Structure, Hardness and Fracture Toughness of Twin Wire Arc-Sprayed FeCrBMnSi Coatings | The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016. | Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono |
| 4 | Effect of Aluminum Content and Deposition Time on Hardness and Wear Resistance of Titanium Aluminum Nitride Thin Layer Deposited by Radio Frequency Sputtering | The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016. | Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono |
| 5 | Deposition of Thin Layer Titanium Aluminium Nitride on High Speed Steel Substrate by Radio Frequency Sputtering | The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya | Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono |
| 6 | Microstructure and Adhesion Properties Post-Annealed metallic Coatingof FeCrBMnSi on Tube and Internal Structure Coal-Fired Boiler | The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya | Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono |
| 7 | The Effects of Zn Mass and Electrolyte Type on the Capacitive Properties of Graphene-Based Supercapacitor | 2016 International Symposium for Young Chemical Engineers, Chemical Engineering Department, National Taiwan University of Science and Technology (NTUST), Taipei-Taiwan, September 1-2, 2016 | Diah Susanti (Invited Speaker), Januardana Hanung Pradita, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim, Yeny Widya Rakhmawati |
| 8 | The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati |
| 9 | Synthesize and Electrochemical Performance of Fe2O3 Nano Ellipse as Anode for Lithium Ion Batteries | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan |
| 10 | Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO3 Ceramics | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani |
| 11 | Laminate composite of TiO2-graphene materials for use as Dye Sensitized Solar Cell (DSSC) | the 3rd International Seminar on Fundamental and Application of Chemical Engineering (ISFACHE), Chemical Engineering Department, ITS, 1-2 November 2016 | Diah Susanti, Yunizar Natanael Pragistio, Haniffudin Nurdiansah, Hariyati Purwaningsih, Rindang Fajarin, Ratna Ediati, Yeny Widya Rakhmawati |
| NO | JUDUL MAKALAH | SEMINAR | PENULIS |
| 1 | The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati |
| 2 | Synthesize and Electrochemical Performance of Fe2O3 Nano Ellipse as Anode for Lithium Ion Batteries | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan |
| 3 | Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO3 Ceramics | MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 | Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani |