Publikasi Ilmiah

Publikasi Internasional

Judul Publikasi Jurnal Internasional dan Nasional

No Judul Artikel Nama Penulis Nama Jurnal
1 Failure Investigation of a High-Temperature Cast Soot Blower Lance Tube Nozzle Budi Agung Kurniawan Journal of Failure Analysis and Prevention
2 Manipulation of Nitrogen-Heteroatom Configuration for Enhanced Charge-Storage Performance and Reliab Sutarsis ACS Applied Materials and Interfaces
3 The strength of polylactic acid composites reinforced with sugarcane bagasse and rice husk Hariyati Purwaningsih Materials Science Forum
4 Effect of sintering temperature on morphology, mechanicai properties and degradation rate of magnesi Agung Purniawan

Amaliya Rasyida

Sigit Tri Wicaksono

Hariyati Purwaningsih

Journal of Computational and Theoretical Nanoscience
5 Synthesis of ZnO/rGO/TiO2 Composite and Its Photocatalytic Activity for Rhodamine B Degra Hariyati Purwaningsih

Diah Susanti

IOP Conference Series: Materials Science and Engineering
6 Effective beneficiation of low content nickel ferrous laterite using fluxing agent through Na2< Yuli Setiyorini

Sungging Pintowantoro

Fakhreza Abdul

Materialwissenschaft und Werkstofftechnik
7 Tangential X-Ray Radiography for Pitting Geometry Analysis of Outside Wall of Insulated Steel Pipes Sulistijono Russian Journal of Nondestructive Testing
8 A meshless generalized finite difference method for 2D elasticity problems Widyastuti

Mas Irfan Purbawanto Hidayat

Rindang Fajarin

Engineering Analysis with Boundary Elements
9 MnO2 Nanoparticles Prepared by Alternating Monopolar Arrangement Electrolysis and Their E Hariyati Purwaningsih

 

IOP Conference Series: Materials Science and Engineering
10 Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition, structure, Hariyati Purwaningsih

 

Polymer Testing
11 Effects of sample shapes and thickness on distribution of temperature inside the mineral ilmenite du Mas Irfan Purbawanto Hidayat

 

Minerals
12 Design for temperature distribution of continuous furnace system for sintering application Wikan Jatimurti

Vania Mitha Pratiwi

Widyastuti

IOP Conference Series: Earth and Environmental Science
13 Direct reduction of nickel laterite limonitic ore using a coal-dolomite mixture bed and Na2</in Fakhreza Abdul

Sungging Pintowantoro

Journal of Chemical Technology and Metallurgy

 

14 The Rate of HF Formation During Addition of Alumina to NaF-AlF3 Melts Dian Mughni Fellicia Minerals, Metals and Materials Series
15 High oxygen reduction reaction activity on various iron loading of Fe-PANI/C catalyst for PEM fuel c Diah Susanti

Lukman Noerochim

Ionics

 

Judul Publikasi Jurnal Internasional dan Nasional

No Judul Artikel Nama Penulis Nama Jurnal
1 The Effect of Aging on Microstructure, Mechanical Properties, and Electrical Conductivity of 6061 Al Dian Mughni Fellicia, Rochman Rochiem 2019 International Conference on Technologies and Policies in Electric Power and Energy, TPEPE 2019
2 High stability on N-doped LiFePO4/C as cathode of lithium-ion battery Lukman Noerochim. Diah Susanti AIP Conference Proceedings
3 Characterization of vinyl ester bio-resin for core material sandwich panel construction of ship structur Sigit Tri Wicaksono, Hosta Ardhyananta AIP Conference Proceedings
4 High electrochemical performance of F-doped LiFePO4 as cathode for lithium-ion battery Diah Susanti,  Lukman Noerochim AIP Conference Proceedings
5 Improvement of compressive strength of Mg-Fe-Ca alloy by heat treatment as biodegradable implant Sigit Tri Wicaksono,  Amaliya Rasyida,  Agung Purniawan AIP Conference Proceedings
6 The study of the distribution and deformation of burden layer in 250 ton/day mini blast furnace using Fakhreza Abdul,  Mas Irfan Purbawanto Hidayat,  Sungging Pintowantoro International Journal on Advanced Science, Engineering and Information Technology
7 Structural evaluation on sugarcane bagasse treated using sodium and calcium hydroxide Hariyati Purwaningsih E3S Web of Conferences
8 Physical, tensile, and biodegradability properties of cross-linked polyvinyl alcohol/palm kernel she Hosta Ardhyananta BioResources
9 Selective reduction of laterite nickel ore Fakhreza Abdul,  Sungging Pintowantoro Materials Transactions
10 On Impact Problems of Projectile Using Meshless Peridynamics Analysis Mas Irfan Purbawanto Hidayat IOP Conference Series: Materials Science and Engineering
11 The Preparation of Electrical Double Layer Capacitor (EDLC) from Boron-doped Reduced-Graphene Oxide Hosta Ardhyananta,  Hariyati Purwaningsih,  Diah Susanti IOP Conference Series: Materials Science and Engineering
12 Effect of Addition Tahongai Leaf Extract (Kleinhovia hospita Linn.) As Organic Inhibitor on 1040 AIS Sulistijono IOP Conference Series: Materials Science and Engineering
13 The effect of deposition time on ag-zn thin film forming using rf sputtering for antimicrobial coating Rindang Fajarin,  Sigit Tri Wicaksono,  Agung Purniawan Materials Science Forum
14 Analysis of cylindrical briquette dimension on total iron content and the degree of metallization in Sungging Pintowantoro,  Fakhreza Abdul Materials Science Forum
15 Study of the effect of pp and ldpe thermoplastic binder addition on the mechanical properties and ph Sigit Tri Wicaksono,  Amaliya Rasyida,  Hosta Ardhyananta Materials Science Forum
16 Effect of rgo addition toward photocatalyst properties of zno/rgo/tio2 for rhodamine b degradation Hariyati Purwaningsih,  Diah Susanti Materials Science Forum
17 Effect of nanocellulose on acoustical and thermal insulation properties of silicone rubber composite Amaliya Rasyida, Agung Purniawan, Moh. Farid, Diah Susanti Materials Science Forum
18 Analysis of large bell angle in double bell system on burden material distribution and layer deforma Fakhreza Abdul, Mas Irfan Purbawanto Hidayat, Sungging Pintowantoro Materials Science Forum
19 Nanocarbon from rice straw as supercapacitor electrode Vania Mitha Pratiwi Materials Science Forum
20 The study of additive variation in smelting process of sponge iron into pig iron on the fe content a Fakhreza Abdul, Sungging Pintowantoro Materials Science Forum
21 Preparation and characterization of carbon from petung bamboo (Dendrocalamus asper) and ori bamboo Hosta Ardhyananta

Alvian Toto Wibisono

Sigit Tri Wicaksono

Materials Science Forum
22 Investigation of carbon composition for electrochemical properties as pemfc cathode catalyst Lukman Noerochim

Diah Susanti

Materials Science Forum
23 Preliminary characterization of hydrogel composite alginate/pva/r-go as an injectable materials for Sigit Tri Wicaksono

Amaliya Rasyida

Materials Science Forum
24 Effect of high loading glycine on fe2o3 nano oval as anode for lithium-ion battery Lukman Noerochim

Budi Agung Kurniawan

Materials Science Forum
25 Finite element simulation of delamination in carbon fiber/epoxy laminate using cohesive zone model Mas Irfan Purbawanto Hidayat

Lukman Noerochim

Materials Science Forum
26 Characterization of nasicon structure prepared with titanium dioxide doping for nox gas sensor applied Widyastuti

Hariyati Purwaningsih

Vania Mitha Pratiwi

Materials Science Forum
27 Preliminary study of alginates extracted from brown algae (Sargassum sp.) available in madura island Vania Mitha Pratiwi

Sigit Tri Wicaksono

Amaliya Rasyida

Materials Science Forum
28 Analysis the effect of temperature and holding time of full-annealing heat treatment to micro struct Rochman Rochiem

Dian Mughni Fellicia

Materials Science Forum
29 Adsorption performance of li1.6mn1.67o4 for lithium extraction from geothermal fluid of lumpur sidoarjo Rindang Fajarin

Lukman Noerochim

Materials Science Forum
30 Effect of ph, rotation speed and imidazoline-paracetamol based inhibitor volume ratio on corrosion Budi Agung Kurniawan

Vania Mitha Pratiwi

Materials Science Forum
31 Porous silica nanomaterial derived from organic waste rice husk as highly potential drug delivery Vania Mitha Pratiwi

Hariyati Purwaningsih

Agung Purniawan,  Diah Susanti

Materials Science Forum
32 Experimental Analysis on the Tensile Strength of Polyester Resin based Calcium Carbonate Powder and Sigit Tri Wicaksono

Hosta Ardhyananta

IOP Conference Series: Materials Science and Engineering
33 Effect of Acetone/Isopropanol as Solvent TiO2 Active Flux on Penetration Characteristics Agung Purniawan

Hosta Ardhyananta

IOP Conference Series: Materials Science and Engineering
34 Effect of Calcium Carbonate on the Tensile and Density Properties of Kenaf/Polyester Hybrid Composit Hosta Ardhyananta

Sigit Tri Wicaksono

IOP Conference Series: Materials Science and Engineering
35 Synthesis and characterization of mesoporous silica nanoparticles (MSNp) MCM 41 from natural waste Vania Mitha Pratiwi

Diah Susanti

Rochman Rochiem

IOP Conference Series: Materials Science and Engineering
36 Efficiency and characterization study of low voltage current sacrificial anode on Al-Zn-Cu and Al-Zn Sulistijono IOP Conference Series: Materials Science and Engineering
37 Reversible ON/OFF switching of photoluminescence from CsPbX3 quantum dots coated with sil Azzah Dyah Pramata Chemical Communications
38 Modeling and experimental study of Al-Cu alloy sand casting for circuit breaker Mas Irfan Purbawanto Hidayat

Alvian Toto Wibisono

Rochman Rochiem

Dian Mughni Fellicia

International Journal on Advanced Science, Engineering and Information Technology
39 Study of lateral vibration of drilling string with mass imbalance using finite element Mas Irfan Purbawanto Hidayat International Journal on Advanced Science, Engineering and Information Technology
40 Formation of Carbon Fibres from Polymer Poly(vinyl alcohol)/Acetylene Black using Electrospinning Me Hariyati Purwaningsih IOP Conference Series: Materials Science and Engineering
41 High electrochemical performance of Li4Ti5O12/C synthesized by ball Widyastuti

Diah Susanti,  Lukman Noerochim

Ionics
42 Analysis on the effect of pressure and mass fraction of chromium to mechanical properties and electro Lukman Noerochim International Journal of Microstructure and Materials Properties
43 A Preliminary Study on the Thermo-optics Characteristics of Chromium Ferrite Ferrofluids Sigit Tri Wicaksono IOP Conference Series: Materials Science and Engineering
44 The Enhancement of Compressive Strength of Cement-Based Composite Filled with LDPE/PET/Styrofoam Agg Sigit Tri Wicaksono, Mas Irfan Purbawanto Hidayat IOP Conference Series: Materials Science and Engineering
45 Effect of Cetyl Trimethyl Ammonium Bromide as Template of Mesoporous Silica MCM-41 from Rice Husk by Vania Mitha Pratiwi, Hariyati Purwaningsih, Agung Purniawan, Diah Susanti IOP Conference Series: Materials Science and Engineering
46 Synthesis and electrochemical performance of �±-Fe2O3 nano ellipse as anode fo Diah Susanti, Lukman Noerochim, Tubagus Noor Rohmannudin Asian Journal of Chemistry
47 Meshless local B-spline collocation method for heterogeneous heat conduction problems Mas Irfan Purbawanto Hidayat Engineering Analysis with Boundary Elements
48 Deformation and failure of sugarcane bagasse reinforced PP Hariyati Purwaningsih European Polymer Journal
49 Synthesis of dual-phase Li4Ti5O12-TiO2nanowires as anode Lukman Noerochim, Hariyati Purwaningsih Ionics
50 Effect of degassing time and cooling rate on microstructure and porosity of aluminum 6061 alloy usin Alvian Toto Wibisono,  Wikan Jatimurti Materials Science Forum

Judul Publikasi Jurnal Internasional dan Nasional

No Judul Artikel Nama Penulis Nama Jurnal
1 A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan International Journal of Computational Methods: 15(2) pp 18500071-34

2018

2 Ni and Zn Substituted M-type Barium Hexaferrite Processed by Sol–Gel Auto Combustion Method Widyastuti, Vania Mitha Pratiwi, M. Febri Dwi Journal of Physics, 877 (12015), 2018, terindex Scopus
3 Comparison of corrosion inhibitor performance based on green corrosion inhibitor of extract leaf tobacco and commercial imidazoline inhibitor in a sweet environment at carbon steel AISI 1045 in NaCl 3.5% solution Mochamad Alvan Mifta Chusururi, Budi Agung Kurniawan, Lukman Noerochim Journal of Applied and Physical Sciences

4(11) pp 14-24, 2018 (tidak terindex scopus)

4 Pelapisan FeCrMnNiSi pada Grey Cast Iron FC 25 Variabel Tekanan Gas pada Metode Thermal Arc Spray Hariyati Purwaningsih, Agung Purniawan, Rifqi Tantyo Putra Jurnal Ilmu Dasar Vol 19(1) pp 29-36, 2018

(NASIONAL)

 Judul Publikasi di Seminar Internasional (terindex SCOPUS)

NO JUDUL MAKALAH SEMINAR PENULIS
1 Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Hosta A, Amaliya R
2 Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R
3 INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Hosta A, Amaliya R, Mas Irfan PH
4 The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R
5 Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal
6 Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 M. Nur Rohman, Mas Irfan PH, Agung Purniawan
7 Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rezza Ruzzuqi, Mas Irfan PH, Widyastuti
8 Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Mas Irfan PH, Widyastuti, Peniel Simaremare
9 Effect of casing imperfection on the casing strength in steam injection wells 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 Mas Irfan PH, Sonny Irawan, Muhamad Zaki A
10 Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul
11 Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Yuli Setiyorini, Fanny Leestiana, Agung Purniawan
12 New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 M. Arief Setyawan Sungging Pintowantoro,  Fakhreza Abdul
13 Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fakhreza Abdul, Sungging Pintowantoro,  Adji Kawigraha
14 Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fakhreza Abdul, Sungging Pintowantoro,  Ridwan Bagus
15 Nanocellulose Based Polymer Composite for Acoustical Materials The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Moh. Farid, Agung Purniawan, Diah Susanti
16 Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono
17 Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih
18 Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono
19 Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of  AISI 1045 Steel in 3.5% NaCl Environment The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi
20 A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti
21 Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi

 

22 Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Dika Anggara, Diah Susanti

 

23 Porous Micro Sphere Fe2O3 as Anode for  Lithium Ion Batteries The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Diah Susanti, Achmad Subhan
24 Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Diah Susanti, Amien Widodo
25 Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono
26 Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Yoel Rizky, Sulistijono, Eli Novita
27 Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 Aji Ridhotullah, Sulistijono, Rahmat Ashari
28 Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fadil Azhar Ekoputra, Sulistijono, Ika Ismail
29 Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) – Polyester

 

The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Ammar Farhan Rayudi, Sulistijono, Firman Sidiq
30 Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Firman Sidiq, Sulistijono, Ika Ismail
31 The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali
32 Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali
33 Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract

 

The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Eli Novita Sari, Sulistijono, Yoel Rizky
34 The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Iqbal Huda Sihotang, Sulistijono, Ika Ismail
35 Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Haniffudin Nurdiansyah
36 FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
37 The Effect of Weight Fraction Fe2O3:TiO2 and Temperature Process of Pseudobrookite Synthesize (Fe2TiO5) on Optical and Electrical Properties The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti
38 The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi
39 Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rindang Fajarin, Amelthya Rahel, Widyastuti
40 Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Widyastuti

Judul Publikasi di Seminar Nasional dan Internasional tidak terindex Scopus

NO JUDUL MAKALAH SEMINAR PENULIS
1 Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 Mas Irfan PH, Widyastuti, Peniel Simaremare
2 ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan
3 The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor TACT 2017 International Thin Films Conference, Hualien, Taiwan Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R
4 PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY Seminar Nasional Fisika ke II Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
5 Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat Seminar Nasional Fisika ke II Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem

Judul Publikasi Jurnal Internasional

No Judul Artikel Nama Penulis Nama Jurnal
1 Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Tadimalla V L N Rao ASME Journal of Heat Transfer
2 A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials Mas Irfan P. Hidayat, Bambang Ariwahjoedi, Setyamartana Parman, Sonny Irawan International Journal of Computational Methods
3 Mechanical Properties and Thermal Stability of Epoxy/RTV Silicone Rubber Fahriadi Pakaya, Hosta Ardhyananta, Sigit Tri Wicaksono IPTEK The Journal for Technology and Science
4 Effect of Screw Diameter in Femoral Fracture Fixation Modeled by Finite Element Method Muhammad Nashrullah, Belladina Clara Shinta, Mas Irfan P. Hidayat, Agung Purniawan, Yuli Setiyorini IPTEK The Journal for Technology and Science
5 Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine ST Wicaksono, SH Chiu, KT Chen Science and Engineering of Composite Materials Vol 24 issue 6, 2017

Judul Publikasi di Seminar Internasional (terindex SCOPUS)

NO JUDUL MAKALAH SEMINAR PENULIS
1 Study on Mechanical and Physical Properties of Composite Materials with Recycled PET as Fillers for Paving Block Application The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Hosta A, Amaliya R
2 Characterization of PLA/Bovine Bone Composite as A Candidate Material For Artificial Bone The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Adven FN Hutajulu, Hosta A, Amaliya R
3 INTERNAL GEOMETRY EFFECT OF STRUCTURED PLA MATERIALS MANUFACTURED BY DROPLET-BASED 3D PRINTER ON ITS MECHANICAL PROPERTIES The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sigit TW, Hosta A, Amaliya R, Mas Irfan PH
4 The Effect of Extraction Methods on Final Properties of Alginates obtained from Brown Algae (Sargassum Sp.) Available in Madura Island as Hydrogel Materials The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Amaliya R, Thalyta R Pradipta, Sigit TW, Vania Mitha P, Yeny Widya R
5 Numerical Simulation of Temperature Distribution in Cylindrical Ilmenite (FeTiO3) due to Microwave Heating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Mas Irfan PH, Dian Mughni, Ferdiansyah Iqbal
6 Prediction of Composite Fatigue Life under Variable Amplitude Loading Using Artificial Neural Network Trained By Genetic Algorithm The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 M. Nur Rohman, Mas Irfan PH, Agung Purniawan
7 Analysis of Two Dimensional Heat Conduction in Functionally Graded Materials (FGMs) Using Finite Element Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rezza Ruzzuqi, Mas Irfan PH, Widyastuti
8 Simulation of Impact Ballistic of Cu-10wt%Sn Frangible Bullet using Smoothed Particle Hydrodynamics The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Mas Irfan PH, Widyastuti, Peniel Simaremare
9 Effect of casing imperfection on the casing strength in steam injection wells 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 Mas Irfan PH, Sonny Irawan, Muhamad Zaki A
10 Analyzing the Effect of Large Bell Diameter Size to The Layer Deformation and Burden Materials Distribution in 250 Ton/Day Mini Blast Furnace Capacity using Discrete Element Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Sungging Pintowantoro, Mas Irfan PH, Fakhreza Abdul
11 Study of Variation Grain Size in Desulphurization Process of Calcined Petroleum Coke The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Yuli Setiyorini, Fanny Leestiana, Agung Purniawan
12 New Alternative to the development of dental Filling Material Made from (CH-CaCO3-(C-HA)-MMA) Resulted from The Recycling of Organic Material The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 M. Arief Setyawan Sungging Pintowantoro,  Fakhreza Abdul
13 Effects of Reduction Temperature to Ni and Fe Content and The Morphology of Agglomerate of Reduced Laterite Limonitic Nickel Ore by Coal-bed Method The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fakhreza Abdul, Sungging Pintowantoro,  Adji Kawigraha
14 Analysis of Holding Time Variations to Ni and Fe Content and Morphology in Nickel Laterite Limonitic Reduction Process by using Coal-Dolomite Bed The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fakhreza Abdul, Sungging Pintowantoro,  Ridwan Bagus
15 Nanocellulose Based Polymer Composite for Acoustical Materials The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Moh. Farid, Agung Purniawan, Diah Susanti
16 Morphology and Inhibition Performance of Ag Thin Film as Antimicrobial Coating Deposited by RF-PVD on 316 L Stainless Steel The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Yudhistira S.A.K, Amaliya Rasyida, Tri Mardji Atmono
17 Influence of Copper Composition on Mechanical Properties of Biodegradable Material Mg-Zn-Cu for Orthopedic Application The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Hana Maulidiah, Hariyati Purwaningsih
18 Effect of Deposition Time of Sputtering Ag-Cu Thin Film on Mechanical and Antimicrobial Properties The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Agung Purniawan, Ratna Hermastuti, Hariyati Purwaningsih, Tri Mardji Atmono
19 Effect of Fluid Flow, pH and Tobacco Leaf Extracts Concentration as Organic Inhibitors to CO2 Corrosion Characteristics of  AISI 1045 Steel in 3.5% NaCl Environment The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Budi Agung Kurniawan , Vania Mitra Pratiwi , Nafi’ul Fikri Ahmadi
20 A Review of Various Gas Pressure of Wire Arc Spray On FeCrBMnSi Metal Coating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rochman Rochiem, Budi Agung Kurniawan, Wikan Jatimurti
21 Effect Of Current And Travel Speed Variation Of TIG Welding On Microstructure And Hardness Of Stainless Steel SS 316L The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Wikan Jatimurti, Budi Agung Kurniawan, Vania Mitra Pratiwi

 

22 Electrochemical Performance of Fe3O4 Micro Flower as Anode for Lithium Ion Batteries The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Dika Anggara, Diah Susanti

 

23 Porous Micro Sphere Fe2O3 as Anode for  Lithium Ion Batteries The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Diah Susanti, Achmad Subhan
24 Effect of Temperature on Adsorption Performance of Lithium Manganese Oxide for Lithium Extraction of Lumpur Sidoarjo The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Lukman Noerochim, Diah Susanti, Amien Widodo
25 Study of Extraction with Soxhletation Method on Organic Material as Green Corrosion Inhibitor The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Tubagus Noor Rohmannudin, Lukman Noerochim, Sulistijono
26 Utilization of Tahongai Stem Bark (Kleinhovia hospita Linn.) Extract as Corrosion Inhibitor on API 5L Steel The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Yoel Rizky, Sulistijono, Eli Novita
27 Study of Using Mixture of Bintaro and Coconut Shell Charcoal Powder as Pack Carburizing Media on ST 41 Steel 1st International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 Aji Ridhotullah, Sulistijono, Rahmat Ashari
28 Effect a Chemical Treatment of Pineapple Leaf Fiber (PALF) for Mechanical Properties as a Reinforced Composite Matrix Polyesters The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Fadil Azhar Ekoputra, Sulistijono, Ika Ismail
29 Analysis of Sound Insulation Capability and Modulus Elasticity according to Shape and Composition of Natural Fiber Composite Kayu Galam (Melaleuca leucadendra) – Polyester

 

The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Ammar Farhan Rayudi, Sulistijono, Firman Sidiq
30 Effect of Volume Fraction Filler on Sound Insulation in Oil Palm Fronds Fiber Composite Polyester Matrix The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Firman Sidiq, Sulistijono, Ika Ismail
31 The Effect of Zinc (Zn) Content to Cell Potential Value and Efficiency Aluminium Sacrificial Anode in 0.2 M Sulphuric Acid Environment The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Ahmad Ridho Akranata, Sulistijono, Jatmoko Awali
32 Effect of Heat Input with Current Variation on Weld Overlay GTAW Method wtih ERNi-CI and ERNiFe-CI Fillers on Mechanical Properties and Micro Structure of Main Cap Product The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Muhammad Ikbal Laisa, Sulistijono, Jatmoko Awali
33 Analysis of Efficiency and Corrosion Rate on 1040 AISI Steel with the Use of Organic Inhibitors from Tahongai (Kleinhovia hospita Linn.) Leaf Extract

 

The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Eli Novita Sari, Sulistijono, Yoel Rizky
34 The Effect of Smelting Time and Composition of Palm Kernel Shell Charcoal Reductant toward Extractive Pomalaa Nickel Laterite Ore in Mini Electric Arc Furnace The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Iqbal Huda Sihotang, Sulistijono, Ika Ismail
35 Synthesis of Cashew Nut Shell Liquid (CNSL) by Hot Press Method and its Application as Anti Corrosion Coating The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Haniffudin Nurdiansyah
36 FABRICATION OF MESOPOROUS SILICA NANOPARTICLES BY SOL GEL METHOD FOLLOWED VARIOUS HYDROTHERMAL TEMPERATURE The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
37 The Effect of Weight Fraction Fe2O3:TiO2 and Temperature Process of Pseudobrookite Synthesize (Fe2TiO5) on Optical and Electrical Properties The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Vania Mitha Pratiwi, Rindang Fajarin, Widyastuti
38 The Effect of BaM/PANI Composition with Epoxy Paint Matrix on Single Layer and Double Layer Coating with Spray Coating Method for Radar Absorbing Materials Applications The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Widyastuti, Rindang Fajarin, Vania Mitha Pratiwi
39 Sintering Temperature Effect on Electrical and Thermal Properties of Zn1-xAlxO as Thermoelectric Material Candidate The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Rindang Fajarin, Amelthya Rahel, Widyastuti
40 Study Design of Body And Temperature Zone Continuous Furnace Sintering Material Frangible Cu-5wt%Sn The 3rd International Conference On Materials and Metallurgical Engineering and Technology (ICOMMET) 2017 Widyastuti

Judul Publikasi di Seminar Nasional dan Internasional tidak terindex Scopus

NO JUDUL MAKALAH SEMINAR PENULIS
1 Analisis Impak dan Ricochet Peluru Frangible Cu-10wt%Sn dengan Metode Meshless Smoothed Particle Hydrodynamics Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 Mas Irfan PH, Widyastuti, Peniel Simaremare
2 ANALISA EFEKTIFITAS POLYETHYLENE DAN POLYPROPYLENE SEBAGAI TOP COAT PADA METODE PELAPIS 3 LAYER COATING TERHADAP KETAHANAN KOROSI DARI BAJA API 5L GRADE B Seminar Nasional Metalurgi dan Material (SENAMM) X 2017 Agung Purniawan, Yosaphat SM Siahaan, Budi Agung Kurniawan
3 The effect of nitrogen dopant on the capacitive properties of graphene based supercapacitor TACT 2017 International Thin Films Conference, Hualien, Taiwan Diah Susanti, Dyah Ayu Safitri, Haniffudin Nurdiansah, Hariyati Purwaningsih, Yeny Widya R
4 PELAPISAN FeCrMnNiCSi PADA GREY CAST IRON FC 25 VARIABEL TEKANAN GAS PADA METODE THERMAL ARC SPRAY Seminar Nasional Fisika ke II Hariyati Purwaningsih, Diah Susanti, Haniffudin Nurdiansah
5 Pengaruh Penambahan SiO2 Hasil Ekstraksi Sekam Padi Pada Sintesis Natrium Superionik Konduktor (NASICON) dan Sifat Konduktivitas Ionik Baterai Elektrolit Padat Seminar Nasional Fisika ke II Hariyati Purwaningsih, Agung Purniawan, Rochman Rochiem

Judul Publikasi Jurnal Internasional Terindex SCOPUS

NO JUDUL MAKALAH JURNAL INDEX PENULIS
1 Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery Ionics 22, no. 3 (2016): 341-346. SCOPUS Lukman Noerochim, Ade Okta Yurwendra, and Diah Susanti
2 Building Glass OITC in Warm Temperature Procedia Engineering 145 (2016): 630-637. SCOPUS Mediastika, Christina, Luciana Kristanto, Juliana Anggono, Fefen Suhedi, and Hariyati Purwaningsih.
3 Effect of Nano-BaTiO3 on Thermal,

Mechanical and Electrical Properties of

HDDA/TPA Prepared by a Digital

Light Processor RP Machine

Science and Engineering of Composite Materials. SCOPUS Sigit Tri Wicaksono, Shih-Hsuan Chiu, Kun-Ting Chen, and Sheng-Hong Pong
4 Mechanical Properties of Urethane

Diacrylate/Bamboo Fiber Composite

Fabricated by Rapid Prototyping

System

Rapid Prototyping Journal 21, no. 3 (2015): 262-269. SCOPUS Chiu, Shih-Hsuan, Sigit Tri Wicaksono, Kun-Ting Chen, Chiu-Yen Chen, and Sheng-Hong Pong
5 Morphology of TiAlN Thin Film onto HSS as Cutting Tools by Using

Mosaic-Styled Target RF Sputtering

Method

The Journal of Pure and Applied Chemistry Research 5, no. 2 (2016). BUKAN SCOPUS Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, and Tri Mardji Atmono
6 B-spline collocation method for boundary value problems in complex domains International Journal of Computing Science and Mathematics 7.2 (2016): 110-125. SCOPUS Mas Irfan P Hidayat., Bambang Ariwahjoedi, and Setyamartana Parman
7 Casing strength degradation in thermal environment of steam injection wells Journal of Physics: Conference Series, vol. 710, no. 1, p. 012017. IOP Publishing, 2016. SCOPUS Hidayat, M. I. P., S. Irawan, and Mohamad Zaki Abdullah

Judul Publikasi di Seminar Internasional (tidak terindex SCOPUS)

NO JUDUL MAKALAH SEMINAR PENULIS
1 The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Growth Temperature and Holding Time The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016.

 

Diah Susanti, Mavindra Ramadhani, Hariyati Purwaningsih, Haniffudin Nurdiansah
2  “The Growth of AlN Nanomaterial via Vapor-Liquid-Solid (VLS) Method with Various Various Mass Aluminum Powder and Sputter Time” The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016.

 

Diah Susanti, Ice Trianiza, Hariyati Purwaningsih, Haniffudin Nurdiansah
3 Effect of Post Annealing on Structure, Hardness and Fracture Toughness of Twin Wire Arc-Sprayed FeCrBMnSi Coatings The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016.

 

Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono
4 Effect of Aluminum Content and Deposition Time on Hardness and Wear Resistance of Titanium Aluminum Nitride Thin Layer Deposited by Radio Frequency Sputtering The 6th Basic Science International Conference, BaSIC 2016, Malang, March 2nd – 3rd 2016.

 

Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono
5 Deposition of Thin Layer Titanium Aluminium Nitride on High Speed Steel Substrate by Radio Frequency Sputtering The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya Sigit Tri Wicaksono, Agung Purniawan, IGNB Dwistha Prayukti, Tri Mardji Atmono
6 Microstructure and Adhesion Properties Post-Annealed metallic Coatingof FeCrBMnSi on Tube and Internal Structure Coal-Fired Boiler The 2rd International Conference on Civil Engineering Research (ICCER 2016) and the 12th National Seminar Graduate Program 2016, January 27-28, 2016, Surabaya Agung Purniawan, Hengki Irawan, Sigit Tri Wicaksono
7  The Effects of Zn Mass and Electrolyte Type on the Capacitive Properties of Graphene-Based Supercapacitor 2016 International Symposium for Young Chemical Engineers,

Chemical Engineering Department, National Taiwan University of Science and Technology (NTUST), Taipei-Taiwan, September 1-2, 2016

 

Diah Susanti (Invited Speaker), Januardana Hanung Pradita, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim, Yeny Widya Rakhmawati
8 The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor

 

MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati

 

9 Synthesize and Electrochemical Performance of Fe2O3 Nano Ellipse as Anode for Lithium Ion Batteries MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan
10 Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO3 Ceramics MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani
11 Laminate composite of TiO2-graphene materials for use as Dye Sensitized Solar Cell (DSSC) the 3rd International Seminar on Fundamental and Application of Chemical Engineering (ISFACHE), Chemical Engineering Department, ITS, 1-2 November 2016 Diah Susanti, Yunizar Natanael Pragistio, Haniffudin Nurdiansah, Hariyati Purwaningsih, Rindang Fajarin, Ratna Ediati, Yeny Widya Rakhmawati

Judul Publikasi di Seminar Internasional terindex Scopus

NO JUDUL MAKALAH SEMINAR PENULIS
1 The Effect of Hydrothermal Process Holding Time on The Capacitive Properties of Graphene-Based Supercapacitor

 

MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Diah Susanti, Achmad Azmy Adhytiawan, Hariyati Purwaningsih, Haniffudin Nurdiansah, Lukman Noerochim and Yeny Widya Rakhmawati

 

2 Synthesize and Electrochemical Performance of Fe2O3 Nano Ellipse as Anode for Lithium Ion Batteries MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Lukman Noerochim, Eriek Aristya Pradana Putra, Sulistijono, Diah Susanti and Ahmad Subhan
3 Effect of Sintering Process on the Ferroelectric and magnetic Properties of Fe-doped PbTiO3 Ceramics MRS-ID meeting 2016, Physics Department, Institut Teknologi Bandung (ITB), 25-26 Oktober 2016 Rindang Fajarin, Malik Anjelh Baqiya, Widyastuti, Vania Mitha Pratiwi and Rizka Andani